LogoGanServo
Start inquiry
LogoGanServo
WhatsApp
LogoGanServo

Micro GaN servo PCBA and robotic joint servo OEM manufacturing from prototype to mass production.

Inquiry Email

[email protected]

Email app

Include target torque/speed, quantity, and delivery location.

Instant Chat

+8618857971991

Chat on WhatsApp

Direct response from our engineering team.

Products
  • Micro GaN Servo PCBA
  • Robotic Joint Servo OEM
  • Low Voltage GaN Module
Solutions
  • Humanoid Micro Actuators
  • Drone and eVTOL Servo Control
  • Medical Robotic Arms
OEM Capabilities
  • OEM Manufacturing
  • SMT PCBA Assembly
  • Prototype to Mass Production
Resources
  • Blog
  • About
  • Contact / RFQ
  • Privacy Policy
  • Cookie Policy
  • Terms of Service
© 2026 GanServo. All Rights Reserved.|Backed by Linkup Ai Co., Ltd. Manufacturing delivered by the Advanced Manufacturing Division of Linkup Precision.
Solutions

Solutions & Applications

Select application scenarios to review compact servo electronics fit, integration risks, manufacturing controls, and OEM support direction.

Each solution page is written for buyer-side decisions: what to validate first, where compact GaN servo projects usually fail, and what data should be included in the initial RFQ to avoid quote loops.

Application Selection Workflow

  1. Map the actuator module, motor data, and duty cycle.
  2. Define board envelope, stack height, connector, and heat path limits.
  3. Match encoder, bus, firmware, and test requirements to the target robotics platform.
  4. Freeze prototype validation gates before pilot PO release.
Driver encoder integrated electronics for humanoid micro actuators

Humanoid Micro Actuator Electronics

Micro GaN servo electronics for humanoid fingers, wrists, ankles, and compact joint modules where volume and heat are the hardest constraints.

For humanoid robot teams that need custom servo electronics manufacturing without building a full internal PCBA operation.

  • Low-voltage servo electronics for battery-powered embodied AI platforms
  • Compact board and stacked driver-encoder options for tight joint housings
  • Prototype, pilot, and batch manufacturing support for fast hardware iteration
View details
Lightweight embedded servo control board for UAV and eVTOL actuation

Drone and eVTOL Servo Control

Lightweight GaN servo electronics for UAV actuation, gimbals, payload systems, and compact autonomous platforms.

For drone and robotics OEM teams needing lighter servo electronics and custom PCBA assembly.

  • Weight-sensitive low-voltage board design
  • High-efficiency switching for battery-powered platforms
  • Prototype and pilot support for rapid aerospace robotics iteration
View details
QC lab inspection workflow for precision servo electronics

Medical Robotic Arm Servo Electronics

Compact servo electronics manufacturing support for medical mechatronics, surgical-assist prototypes, rehabilitation devices, and laboratory automation.

For medical hardware teams needing a manufacturing partner for servo-control electronics, not a generic board broker.

  • Clean assembly discipline and traceable production records
  • Compact low-voltage electronics for portable or cart-based systems
  • DFM, inspection, and test planning for high-consequence mechatronic devices
View details
Custom compact servo board for robotic grippers and end effectors

Precision Grippers and End Effectors

Small GaN servo boards and integrated driver-encoder stacks for grippers, end effectors, miniature linear actuators, and precision handling tools.

For automation OEMs and robotics teams that need compact, custom electronics for repeated tool variants.

  • Small form-factor electronics for tight end-effector housings
  • Driver-encoder integration to reduce cables and separate interface boards
  • Pilot manufacturing support for repeated robot tool variants
View details

Solution Comparison Snapshot

SolutionPrimary Buyer FocusKey MetricWhy It Matters
Humanoid Micro Actuator ElectronicsFor humanoid robot teams that need custom servo electronics manufacturing without building a full internal PCBA operation.Mechanical envelope: Customer-defined compact board or stackHumanoid programs usually fail when electronics cannot fit the mechanical joint package.
Drone and eVTOL Servo ControlFor drone and robotics OEM teams needing lighter servo electronics and custom PCBA assembly.Weight target: Application-specific PCBA or module limitEvery gram matters for UAV endurance and payload capacity.
Medical Robotic Arm Servo ElectronicsFor medical hardware teams needing a manufacturing partner for servo-control electronics, not a generic board broker.Traceability: BOM, batch, serial, inspection, and functional test recordsMedical-adjacent robotics buyers need tighter manufacturing evidence than hobby robotics projects.
Precision Grippers and End EffectorsFor automation OEMs and robotics teams that need compact, custom electronics for repeated tool variants.Tool electronics density: Custom board shape or stackEnd effectors need electronics to disappear into the tool without harming serviceability.

Inquiry Email

[email protected]

Email app

Include target torque/speed, quantity, and delivery location.

Instant Chat

+8618857971991

Chat on WhatsApp

Direct response from our engineering team.